Features
mtnGLO® Tent Light Features:
Features patent-pending mtnGLO® Tent Light Technology using durable LED lights to illuminate the interior of your tent with enough light to sort gear, play cards and hang out with friends without blinding them with a headlamp
A simple push-button controller with three settings – on, off and 50% brightness – controls the mtnGLO® lights
LED light strand is integrated into tent seams and is durable and flexible enough to withstand repeated tent pitching and stuffing
Requires three AAA batteries (not included) to operate the mtnGLO® light controller
CE certified
Light routing keeps the light above your head on the ceiling where you need it most
New awning-style vestibules expand covered living space; great for both drizzle and sun protection.
The double zippers also provide multiple access options; great for minimizing wind driven rain or snow getting into your living room.
Features two doors and two vestibules
New 3-D bin ‘mezzanine’ in the foot provides massive, off the floor storage; Oversized ceiling pocket in the head provides great additional storage space; Media pockets provide clean earbud cord-routing from phones or other devices.
New proprietary tent corner construction with unique TipLok Tent Buckle™ streamlines tent set up by combining three functions: secure pole-tip capture, rainfly attachment and tensioner, and stake-out loop. This buckle has a keyed hole so the pole tip locks securely into place during setup, and hinged design stabilizes structure by equalizing forces between the tent body, rainfly, and ground stake.
New proprietary ultralight nylon double rip-stop; Mixed denier fabric offers extra tear strength and puncture resistance without adding weight.
New pre-bent span pole coupled with the 4-way high-volume hub design increases strength, stability, and shedding of rain and snow while creating optimal livable space where you need it most.
Dual low vent vestibule doors coupled with high fly vent maximize options for both active and passive airflow to reduce condensation in all weather conditions.
Dual-zipper doors with easy-grip zipper pulls are smooth-closing and allow for easy entry and exit. Use only one zipper for quick, reach-through access.
Quick Stash door keeper on tent body door makes stowing unzipped door quick and easy.
Velcro® tabs connect fly to pole structure providing perfect pitch and extra stability; pre-cut guylines and tensioners are attached to fly; Reflective guylines and webbing on tent corners make it easy to see at night.
Multiple interior loops for attaching gear lofts, accessories and mtnGLO® Tent & Camp Lights.
To extend the life of your tent floor we recommend using a Big Agnes footprint - sold separately.
Compatible with Copper Spur HV UL3 footprint featuring Tiplok™ Tent Buckles.
Fast Fly setup available with footprint.
The Copper Hotel HV UL Accessory Fly is interchangeable with the standard fly and is available for purchase independently. Convenient for those trips when you need the extra vestibule space - sold separately
Specs
Materials
Fly and floor are silicone treated proprietary ultralight double ripstop mixed denier nylon with 1200mm waterproof polyurethane coating
TipLok Tent Buckle™
Tent body is proprietary ultralight double ripstop mixed denier nylon breathable and polyester mesh
All seams taped with waterproof, solvent-free polyurethane tape (No PVC or VOC's)
DAC Featherlite NFL and NSL pole system
Ultralight plastic clips attach tent body to pole frame
4-way high-volume hub pole design
4 interior mesh pockets, 1 3-D bin pocket, 1 oversized mesh ceiling pocket, 2 media pockets, 8 DAC superlight aluminum J stakes & 4 awning guylines
Gear loft loops included
Footprint - sold separately
Fast Fly setup available
Fits the Large Trapezoid, Wall, Large Wall, Square and Triangle gear lofts - sold separately
Copper Hotel HV UL Accessory Fly- sold separately
Imported
Reviews
Care
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
Setup
COPPER SPUR HV UL & HV UL mtnGLO® SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2, 3, 4 & 5 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & 3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines.
15. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
16. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2, 3, 4 & 5 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2, 3, 4 & 5 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut. 11. Stake out the vestibules then stake out all remaining guylines.
12. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
13. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
English (EUR) | EN 
